Professional 87-108MHz TACONIC TLX-8 PCB for Lowpass

Layer Count: 2L
Board Thickness: 0.8mm
Dimension: 65*44mm
Material: Taconic RF35
Surface Copper: 35μm
Min Hole Diameter: 0.7mm
Min line Width/Space: N/A
Surface Finish: immersion silver

Do you need a PCB for special signal requirement into your products? High Frequency PCB can meet it. High Frequency printed circuit board is also called RF (Radio Frequency) PCB with frequency generally at 500MHz or above, which makes it ideally suited for high-speed designs, as well as commercial microwave and RF applications due to their low Dk/Er (Dielectric Constant), controlled impedance transmission lines and loss of material. The higher transmission frequencies can also provide the faster signal flow rates that are a necessity in today's increasingly complex electronic switches and other components.

Equipped with a professional and thriving high frequency PCB factory, Heros Electronics is an experienced high frequency PCB manufacturer who provides a reliable, superior-performing high frequency PCB fabrication service.

Specialized Materials of High-Frequency Circuit Board

Special materials are required to achieve the high frequency provided by this type of printed circuit board - any changes in the DK/Er value of these materials can affect the impedance of the RF PCB circuit boards. Many PCB designers turn to special material for its lower dielectric loss, reduced signal loss, lower cost of circuit fabrication and better suitability for fast-turnaround prototyping applications.

In addition to choosing the appropriate PCB material and determining the correct the value of the DK/Er, designers must take other parameter into consideration such as conductor width and spacing, substrate constant, etc. These parameters must be exactly specified and implemented with the highest level of process control. We're a High-Frequency PCB Manufacturer that takes the time to assess your needs

Heros Electronics’ Common-used High Frequency PCB Materials

We manufacture high-frequency PCBs with materials from Rogers, Arlon, Taconic, Isola and Teflon. The following table shows some of our common-used high frequency board materials.

Discuss your High Frequency PCB Project with Us Today

Don’t know which high frequency PCB material fits your custom PCB project, or the required material is not listed in the common-used materials table above, please discuss with our engineering sales representative, and we’ll give you our professional reply quickly.

For High Frequency printed circuit boards manufacturing, please send your PCB file (File Package Information) and requirements to info@unitedglory-pcb.com, we'll quote at our quickest speed.